We supply Dr.Sthamer Firefighting Foam to the Fire & Rescue Services
–Dr.Sthamer Foams are Readily 100% Bio-Degradable
-Dr.Sthamer Foams are PFAS Free
–Dr.Sthamer Foams are Fluorine Free
–Dr.Sthamer Class A Foams now available in Yellow Containers
1 – Moussol F-5 Foam
2 – Sthamex Class A Foam
3 – Training Foam
4 – Wetting Agent
5 – Aviation Foam
Dr.STHAMER MOUSSOL® – FF 3/6 F-5 #7942 – Fluorine Free Alcohol Resistant Foam Concentrate – Used at 3% for Class B Hydrocarbons and at 6% for Polar Solvents and Alcohols – Made without PFAS
| MOUSSOL®-APS 3/6 | Details |
|---|---|
| Proportioning rate | |
| non-polar | 3% |
| polar | 6% |
| Expansion | |
| Low-expansion foam | up to 15 times |
| Medium-expansion foam | up to 100 times |
| 25% / 50% drain time | |
| Low-expansion foam | up to 10 / 15 minutes |
| Medium-expansion foam | up to 7 / 10 minutes |
| Frost-resistant | 0 °C / -15 °C |
| Viscosity | pseudoplastic, pump assisted proportioning may be required |
STORAGE – MOUSSOL®-FF 3/6 F-5 can be stored for long periods of time in the sealed original containers and in corrosion-resistant plastic or stainless steel tanks. High temperatures up to +50°C do not affect the quality, neither does temporary freezing at temperatures below the specified frost resistance limit.
SHELF LIFE – MOUSSOL®-FF 3/6 F-5 has a shelf life of >10 years, if stored according to our recommendations.
Download Moussol-FF F-5 Information Sheet (#7942)
Dr.STHAMER – STHAMEX – Class A 0.5% F-15 #9071 Foam – Used as a Class A and CAF’s Foam at 0.5% and as a Wetting Agent from 0.1% – Fluorine Free – Made without PFAS
100% Fluorine Free Foams
STHAMEX ® class A – the expert for solid fuel fires are highly concentrated fire extinguishing agents based on selected foaming ingredients, especially designed for extinguishing solid material (class A) fires and use with compressed air-foam technology(CAFS). Due to its special formulation STHAMEX ® class A can be used for non-polar class B fuels (e.g. diesel or petrol) as both low- and medium-expansion foam.
Sthamex Class A – Sthamex Class A 0.5% F-15 #9071 – Proportioning rate from 0.3%
| Proportioning rate | from 0.3% |
| Type of foam | Wetting agent, low-expansion foam, medium-expansion foam, CAFs Foam |
| Frost resistance | -15 °C |
| Certificate of conformity | EN 1568 part 1 and 3 |
| Environmental acceptability | Physiologically harmless and fully biodegradable. |
| Application | Communal fire services using basic proportioning equipment or CAFS; plastics production; waste handling and recycling companies; tyre storage; wildland fires; industrial operations |
Download Class A Information Sheet #9071
Training Foam N F-0 #9346 – Fluorine Free Training Foam to Mimic Fire Fighting Foam Agent Performance for Training – Made without PFAS
Training foam concentrates are designed for training with foam equipment and fire extinguishing foam systems. The specific recipes limit the environmental impact to a minimum. The surfactants used are easily and 100% biodegradable. Training foam concentrates may be used with all commercially available low, medium and high-expansion foam installations and equipment. They are not suitable for firefighting operations.
Download Training Foam Information Sheet #9346
WETTING AGENT – UltraWet 0,1% F-25 #9041 – Made without PFAS
UltraWet is a wetting agent based on synthetic, surface active components. Used as fire water additive the wetting effect of UltraWet® is considerably higher than conventional foam concentrates at the same concentration. The UltraWet® solution penetrates the surface of materials which are difficult to wet quickly and thoroughly. The use concentration of only 0.1% reduces the environmental impact and allows for a rapid and complete bio degradation.
Main application: Ember forming materials (fire class A), wildfires
Download Wetting Agent Information Sheet #9041
NEW – vaPUREx LV ICAO B 3% F-10 #7341 Fluorine Free Low Viscosity Foam for Aviation Fire Fighting – Made without PFAS
vaPUREx® LV ICAO B 3% F-10 is used with all mobile equipment and fixed foam systems for generating low expansion foam. The induction rate is 3% for low expansion foam on fires of non-polar hydrocarbons. Spilled hydrocarbons should be covered by foam to prevent emissions. The foam blanket suppresses the evaporation of the liquid and prevents a possible ignition.
Download vaPUREx Information Sheet #7341
Download Dr.Sthamer Latest Catalog below
